All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
LEGO Technic Ferrari SF-24 42207 Wall Mount Instructions
These instructions explain how to assemble and install BrickNest wall mounts compatible with the LEGO® Technic Ferrari SF-24 F1 Car 42207.
This guide covers both available mounting options:
-
Vertical Wall Mount
-
Angled Wall Mount
The two products use different mounting designs, so make sure you follow the instructions for the version you purchased.
You can also view all available display solutions for the LEGO Technic Ferrari SF-24 42207, including wall mounts and freestanding display stands.
Important: The LEGO set shown in these instructions is not included with the wall mount.
Choose Your Ferrari SF-24 Wall Mount
Vertical Wall Mount
The vertical mount positions the Ferrari SF-24 upright against the wall. This is a good option for narrow spaces or creating a row of vertically mounted LEGO Formula One cars.
View the Vertical Wall Mount for LEGO Technic Ferrari SF-24 42207
Angled Wall Mount
The angled mount presents the car in a raised display position, creating a more dynamic motorsport-inspired appearance.
View the Angled Wall Mount for LEGO Technic Ferrari SF-24 42207
Before You Begin
Check that you have received all the components supplied with your chosen mount.
You may also need:
-
A suitable screwdriver
-
A spirit level
-
A pencil for marking the fixing position
-
A drill and appropriate drill bit where required
-
Wall fixings suitable for your particular wall type
The screws and wall plugs supplied with the product may not be appropriate for every type of wall. Plasterboard, masonry, brick and other wall materials can require different fixings.
If you are unsure whether the supplied fixings are suitable, consult a qualified person or use fixings specifically rated for your wall.
Do not install the mount on a weak, damaged or unstable surface.
Vertical Ferrari SF-24 Wall Mount Instructions
Step 1: Select the Display Position
Choose where you want the Ferrari SF-24 to be displayed.
Before drilling, allow enough space around the model for:
-
The full length and width of the car
-
Placing the model onto the mount
-
Removing the model without hitting nearby displays
-
Any additional LEGO models you intend to mount beside it
Use a pencil to mark the intended position.
Step 2: Position the Vertical Mount
Hold the vertical mount against the wall in the chosen position.
Use a spirit level to make sure the mount is straight before marking the screw location.
Step 3: Attach the Mount to the Wall
Drill and install the appropriate wall fixing where required.
Position the mount over the fixing point and tighten the screw until the mount sits securely against the wall.
Do not overtighten the screw, as this could damage the mount or wall surface.
Before adding the LEGO model, gently check that the mount:
-
Does not rotate
-
Does not pull away from the wall
-
Sits level
-
Feels secure
Step 4: Locate the Attachment Point on the Ferrari
Carefully turn the completed Ferrari SF-24 over and locate the mounting area shown in the photograph below.
The mount must connect at the indicated Technic structure. Do not force the mount against decorative panels, unsupported pieces or a different part of the model.
Step 5: Place the Ferrari on the Mount
Support the LEGO model with both hands and carefully align the mounting point with the vertical wall mount.
Slowly lower or guide the model into position until it sits correctly on the mount.
Do not release the model until you are satisfied that:
-
The mount is connected at the correct point
-
The model is sitting securely
-
No LEGO pieces are being bent or placed under pressure
-
The wall fixing remains stable
Once secure, step back and check that the Ferrari is positioned as intended.
Angled Ferrari SF-24 Wall Mount Instructions
What Is Included
The angled Ferrari SF-24 wall mount consists of:
-
Two side support pieces
-
One central mounting section
-
One rear joining plate
-
Two screws
-
Two wall plugs
Check that all four printed mount components are present before beginning assembly.
Step 1: Arrange the Components
Place the four wall-mount pieces on a clean, flat surface.
Arrange them in the same orientation shown in the assembly image. The two triangular side supports should sit on either side of the central mounting section.
Make sure the joining pins and corresponding holes are facing one another before pushing any pieces together.
Step 2: Assemble the Angled Mount
Align the pins on the central and rear components with the matching holes in the side supports.
Push the pieces together firmly and evenly until the pins are fully inserted.
Avoid twisting the pieces or applying uneven sideways pressure. The components should connect without excessive force when correctly aligned.
After assembly, inspect each connection and make sure:
-
Every pin is fully inserted
-
The side supports are aligned
-
The mount does not separate when handled gently
-
The central Ferrari attachment point faces in the correct direction
Step 3: Locate the Ferrari Mounting Point
Turn the Ferrari SF-24 over carefully while supporting the model.
Locate the underside section highlighted in the mounting-point photograph. The central mount plate fits against this specific part of the LEGO structure.
The highlighted rectangles and arrow show the correct position and direction of installation.
Do not attach the mount to a different section simply because it appears similar. Using the correct mounting point helps distribute the model’s weight across the intended structure.
Step 4: Mark the Wall Position
Hold the assembled mount against the wall in the chosen display position.
Place a spirit level across the mount and adjust it until it is straight.
Use a pencil to mark both fixing points through the screw holes.
Before drilling, check that the mounted Ferrari will have enough clearance from:
-
The ceiling
-
Shelves
-
Doors
-
Other LEGO displays
-
Furniture
-
Frequently used walkways
Step 5: Install the Wall Fixings
Drill the marked fixing points using a drill bit suitable for your wall and chosen fixings.
Insert the wall plugs where required and position the mount over the fixing points.
Install both screws and tighten them evenly. The mount should sit firmly and level against the wall.
Do not overtighten the screws.
Before placing the LEGO model on the mount, gently test the installation. Stop if the mount moves, the fixings pull out or the wall surface begins to break away.
Step 6: Place the Ferrari on the Angled Mount
Support the Ferrari SF-24 with both hands.
Align the underside mounting point with the central section of the installed wall mount. Carefully guide the model into place until it sits fully and securely on the support.
Keep supporting the car while checking the connection from the side.
Only release the model after confirming that:
-
The central attachment point is properly located
-
Both sides of the model are supported as intended
-
The model does not slide or rock
-
The LEGO structure is not being forced apart
-
The wall mount remains completely secure
Your LEGO Technic Ferrari SF-24 should now be ready for display.
Vertical or Angled: Which Mount Should You Choose?
| Feature | Vertical mount | Angled mount |
|---|---|---|
| Display position | Upright | Raised angled position |
| Wall width required | Lower | Higher |
| Visual style | Compact and organised | Dynamic and motorsport-inspired |
| Best suited to | Narrow spaces and display rows | Feature walls and individual displays |
| Installation | Single mount body | Four-part assembled mount |
Both options are designed specifically around the LEGO Technic Ferrari SF-24 42207. Your preferred version mainly depends on the available wall space and the display style you want.
Removing the LEGO Ferrari From the Mount
Always support the model with both hands before attempting to remove it.
Lift or guide the Ferrari away from the mount using the reverse of the installation movement. Do not pull the model directly away from the wall if it is still connected to the mount.
Avoid applying pressure to the front wing, rear wing, body panels or wheels.
After removing the car, inspect the mount and wall fixings before reinstalling it.
Troubleshooting
The mount components will not connect
Check that every piece is facing the same direction shown in the assembly photograph. Confirm that the pins are aligned with the correct holes before applying pressure.
Do not force incorrectly aligned components together.
The LEGO model does not sit correctly
Remove the model and compare the underside attachment point with the close-up photograph.
Make sure the mount is connecting to the intended Technic structure and that no loose LEGO pieces are obstructing it.
The wall mount is not level
Remove the LEGO model before making adjustments.
Loosen the wall screws slightly, level the mount and retighten the screws. If the fixing holes are incorrectly positioned, reinstall the mount using appropriate new fixing points rather than relying on loose screws.
The wall fixing feels loose
Remove the LEGO model immediately.
Do not continue using the mount until the wall fixing has been replaced with one suitable for the wall material and the installation is secure.
Can the Ferrari be removed from the mount?
Yes. The model can be carefully removed whenever required. Support it with both hands and reverse the installation movement without pulling on fragile LEGO components.
Shop Ferrari SF-24 Display Options
Choose from wall-mounted and freestanding display options compatible with the LEGO Technic Ferrari SF-24 F1 Car 42207:
You can compare every option in the complete Ferrari SF-24 42207 display collection.
For more compatible products, browse our:
Need Help?
If you are uncertain about assembling your mount or identifying the correct attachment point, stop the installation and contact BrickNest.
Include your order number and a clear photograph of the mount or LEGO model so the BrickNest team can identify the issue.
These instructions apply specifically to BrickNest products compatible with the LEGO Technic Ferrari SF-24 F1 Car 42207. They should not be used to install products from another manufacturer.
LEGO® is a trademark of the LEGO Group, which does not sponsor, authorise or endorse this product or guide.