LEGO Collectable F1 Wall Display

Wall Mounted for LEGO® F1® Collectible Race Cars (71049)

Piece Guide

In this set you should receive:

  • 1 Printed Acrylic Grid
  • 12 Black Lego Studs
  • 4 Black Screws

Film Removal

Your Display Stand will come wrapped in a protective film to prevent damages during shipping. These may be in a variety of colours ranging from white,blue or green.

Simpily Peel Back this film and then your case will be ready to assemble.

Desktop Assembly

Creating your desktop display is extremely simple. Simply push your lego collectables onto the studs already inserted into this base display. Now they’ll sit flush with the front of the grid boxes ready to race across your desk.

Wall Assembly

Now your film has been removed we can start attaching your stand to the wall. To do this we recommend you start by holding your display against the wall. Now you can begin to level your set so its straight. This can be done with a spirt level or even using most smartphones.

Now locate the 4 screw holes upon your display. These are the smaller holes with 2 located at each end at the front of those grid boxes.

Once in the correct location, mark out the locations of the holes by drawing through them with a pencil. Now its marked out, drill a small pilot hole for the wall plug to sit into. Now your set can be screwed into the wall.

Once your display is upon your wall. Simpily place your lego collectables onto the lego studs which should be inserted into the display already.

Like what you see?

Buy one here: https://bricknest.co.uk/products/wall-mounted-display-stand-for-lego%C2%AE-f1%C2%AE-collectible-race-cars-71049

Back to blog