How to Assemble your LEGO UCS Millennium Falcon Display Stand
Assembly Preparation
Component Check
Ensure that all component pieces are present within your parcel. This should include:
- 1 Large Base Panel (B-1)
- 1 Minifigure Display Panel (B-2)
- 2 Upright Sections (P-1)
- 1 Stand Support (P-2)
- 1 Cross Section Panel (P-3)
- 21 Black LEGO Studs
FIlm Removal
Your Display Stand will come wrapped in a protective film to prevent damages during shipping. These may be in a variety of colours ranging from white,blue or green. Simpily Peel Back this film and then your Stand will be ready to assemble.
Stand Construction
To Build your Display Stand first start with the large base piece (B-1). Now collect the pieces all the pieces labeled with (P). Start by placing sections (P-1) into the large slots in (P-2) This should create a strong foundation.
Now add the Cross sections support (P-3) at the top of both (P-1) pieces and this will make the stand fairly rigid.
To assemble your minifigure display place the studs into the stand and then place the minifigures ontop. The plaque supplied by LEGO will be place in the middle.
UCS Falcon Set Preparation
We created this display stand so you can display your UCS Falcon in either direction. To do this you first must remove some of the landing legs upon the base of the model.
We recommend getting a second person to help with this stage due to the scale and weight of this set.
Get someone to hold the UCS Falcon upright so you can see all the landing legs. For your display you need to remove the lower legs on the falcon for the direction you’re display it. The images below show what legs to remove.
Now that your UCS falcon is ready to be displayed you now need to place it onto the display stand.
We recommend lifting the UCS falcon by the centre section and holding the side that will be displayed at the base. (The side you removed the legs from)
When placing your falcon on the stand, we recommend one person lifting the model and for the another person to be behind the model guiding it and moving the falcon onto the stand. For the falcon to be displayed correctly, the BrickNest Logo needs to slot into the gaps on the falcons base left by the removed legs. The angle should then mean the falcon falls back and rests on the supporting (P-1) pieces.
If you’re still struggling to display your UCS Falcon please feel free to email:
bricknest.uk@gmail.com
for advice and further instructions