All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
LEGO Wall Mounts: The Complete Buyer's Guide
Once a LEGO set is finished, the next question is often where to put it.
Larger LEGO cars, aircraft and spacecraft can quickly take over shelves and desks, particularly once a collection starts growing. Wall mounting offers an alternative: it frees up usable surface space while turning the finished model into part of the room itself.
But not every LEGO wall mount works in the same way. Different models suit different mounting positions, wall types require different fixings, and the best orientation depends on both the set and the space available.
This guide explains what to consider before choosing a LEGO wall mount, including mount types, orientations, wall placement and which LEGO themes work particularly well on the wall.
Already know what you're looking for? Browse our LEGO Wall Mounts collection.
What Is a LEGO Wall Mount?
A LEGO wall mount is a purpose-built bracket designed to hold a completed LEGO model securely against a wall.
Unlike placing a model on a shelf, wall mounting uses otherwise unused vertical space. Depending on the mount and model, the set can be displayed horizontally, vertically or at an angle.
For larger builds, this can make a significant difference.
A LEGO Technic car that may require 50–60 cm of shelf width can instead be positioned vertically on a relatively narrow section of wall. Likewise, Star Wars ships and aircraft can be displayed in flying positions that would be difficult to reproduce on a conventional shelf.
BrickNest wall mounts are designed around specific LEGO sets rather than using one generic bracket for multiple models.
Set-specific mounts are designed around the geometry and support points of an individual LEGO model.
Set-Specific vs Universal LEGO Wall Mounts
One of the first choices is between a universal bracket and a mount designed for a particular LEGO set.
Set-specific wall mounts
A set-specific mount is designed around one particular model.
That allows the bracket to account for:
- the shape of the LEGO set
- its weight distribution
- suitable structural support points
- the desired mounting angle
- how much of the bracket remains visible
For collectors who care about presentation, this usually provides the cleanest result.
It also removes much of the guesswork involved in adapting a general-purpose bracket to an expensive completed model.
Universal LEGO wall mounts
Universal mounts attempt to accommodate several different models.
They can make sense when flexibility is more important than appearance, but the compromise is that the bracket has not been designed around the exact shape of one specific build.
For larger Technic cars, aircraft and UCS-style models, I generally prefer a set-specific mounting system.
Which LEGO Sets Are Best for Wall Mounting?
Not every LEGO model needs to go on a wall.
Models that particularly benefit tend to be large, visually distinctive from the front or side, and awkward to display efficiently on conventional furniture.
Several categories work especially well.
LEGO Technic Cars
Large LEGO Technic cars are some of the strongest candidates for wall mounting.
Models such as Formula One cars and Technic supercars occupy a considerable footprint when displayed flat, despite often having relatively shallow depth.
Putting them on the wall can therefore recover a large amount of shelf or desk space.
Vertical mounting is particularly effective for narrow walls, while angled mounting can make the car appear more dynamic.
If your collection is mainly cars, see our dedicated LEGO Technic wall mount collection.
LEGO Formula 1 Cars
F1 models are particularly suitable because several can be arranged together as a collection.
Instead of displaying four cars nose-to-tail across a long shelf, they can be arranged vertically, diagonally or in a grid.
This is particularly useful for collections containing models such as Ferrari, McLaren, Mercedes and Red Bull.
For more inspiration, read our guide to displaying LEGO F1 cars, or browse our LEGO F1 wall mounts.
LEGO Star Wars Ships
Wall mounting also works particularly well with LEGO Star Wars spacecraft.
Many ships naturally look better in flight than sitting flat on a shelf. A wall mount can also make large models such as the Venator, Millennium Falcon, X-Wing or Star Destroyer easier to incorporate into a room.
For more examples, read How to Display LEGO Star Wars Ships: Wall Mounts vs. Stands or browse our LEGO Star Wars Wall Mounts.
LEGO Aircraft
Aircraft are another natural fit because their shape already lends itself to a flying display.
Models such as the LEGO Icons Concorde and PAN AM Airliner can require substantial horizontal shelf space. Wall mounting allows the model to become a feature rather than something that has to fit onto furniture.
Depending on the room, aircraft can work particularly well horizontally or in a vertical climbing position.
Vertical, Horizontal or Angled: Which Is Best?
This is probably the most important decision after choosing the correct mount for the model.
There isn't one orientation that is universally better.
It depends on what you're displaying and the shape of the wall.
Vertical LEGO Wall Mounts
A vertical mount positions the model nose-up or nose-down.
Best for:
- narrow wall spaces
- displaying several cars side by side
- rooms with limited horizontal width
- creating a dramatic climbing appearance
Vertical mounting is especially useful for Technic and F1 cars because it dramatically reduces the amount of horizontal wall space each model occupies.
If you are building a larger car collection, this is often the most space-efficient option.
Horizontal LEGO Wall Mounts
Horizontal mounting keeps the model closer to its natural orientation.
It works particularly well for:
- spacecraft
- aircraft
- ships
- models where the side silhouette is the main feature
It generally uses more wall width than a vertical display, but can create a very natural flying effect.
Angled LEGO Wall Mounts
An angled mount sits somewhere between the two.
This works especially well with cars because it creates a stronger sense of movement while still showing both the front and side of the model.
Angled displays also work nicely when several cars are staggered across a larger feature wall.
How Much Wall Space Do You Need?
Measure before buying.
It sounds obvious, but the amount of wall space required is determined by the displayed orientation, not simply the LEGO set's dimensions when sitting on a desk.
A vertical F1 car may occupy very little wall width but considerably more height.
A horizontally displayed aircraft may require the opposite.
Before mounting a model:
- Measure the finished LEGO set.
- Decide on the intended orientation.
- Mark the approximate footprint on the wall.
- Leave space between neighbouring models.
- Check nearby doors, shelves, switches and furniture.
Painter's tape is useful for marking the approximate outline of a display before drilling anything.
What Wall Can You Mount LEGO On?
The wall itself matters just as much as the bracket.
Brick, blockwork, plasterboard and other wall constructions require different fixing methods.
The supplied fixing may not be appropriate for every wall, so you should always identify your wall type and use a fixing suitable for both the wall and the mounted load.
If you're unsure about the construction of the wall, concealed pipes or electrical cables, or the correct fixing method, seek appropriate advice before drilling.
For the installation process itself, see our separate guide:
How to Wall Mount Your LEGO Models
Do LEGO Wall Mounts Damage the Model?
A well-designed wall mount should not require permanent alteration of the LEGO set.
Set-specific mounts are generally designed to support the model using existing structural areas of the build.
The model itself should therefore remain removable.
However, always use the mount designed for the exact set number and follow its assembly instructions.
LEGO models can vary considerably in weight and construction even when they appear similar.
Are 3D-Printed LEGO Wall Mounts Strong Enough?
3D printing is well suited to specialised display products because the geometry can be tailored to an individual model.
Strength, however, depends on much more than the manufacturing method alone.
A wall-mounted display relies on:
- appropriate product design
- correct material choice
- suitable wall fixings
- correct installation
- the mount being used with its intended LEGO set
BrickNest wall mounts are designed and manufactured in the UK for specific compatible LEGO sets.
Wall Mounts vs Display Stands
Wall mounting isn't necessarily the right solution for every collector.
A display stand may be preferable if:
- you rent and don't want to drill walls
- you frequently move your models
- you have plenty of shelf space
- you want the model at desk or eye level
- you like changing your layout regularly
Wall mounts are usually better when:
- shelf space is limited
- you want the model to become wall art
- you're displaying several large vehicles
- you want a permanent collection layout
BrickNest produces both wall mounts and display stands, so the right choice depends on the model and the space available.
How to Plan a LEGO Wall Display
A single mounted model looks good.
A planned collection can look substantially better.
Before drilling for several mounts, decide on the visual structure.
Common layouts include:
Grid
Best for several similar models such as LEGO F1 cars or Speed Champions cars.
Staggered
Models alternate in height, creating a less rigid layout.
Feature-piece layout
One larger model — for example Concorde or a Star Wars capital ship — acts as the centrepiece with smaller sets around it.
Theme wall
Keep related models together, such as:
- LEGO Formula One
- LEGO Technic supercars
- LEGO Star Wars ships
- LEGO aircraft
For a more detailed planning guide, see How to Create a LEGO Display Wall.
What Should You Look for When Buying a LEGO Wall Mount?
Before buying, check five things.
1. Exact LEGO set compatibility
The set number should be clearly stated.
2. Mount orientation
Check whether the product is vertical, horizontal or angled.
3. Wall fixing requirements
Know what kind of wall you're mounting onto.
4. Installation instructions
You should know how the mount attaches before installation.
5. How visible the bracket will be
A good display should keep the focus on the LEGO model rather than the hardware supporting it.
Choosing the Right LEGO Wall Mount
The best mount is ultimately the one designed for the correct LEGO set and the space where you want to display it.
For narrow spaces, vertical mounts can be particularly effective.
For spacecraft and aircraft, a horizontal flying pose often feels most natural.
For LEGO cars, angled mounting can create a more dynamic display.
And if you're building a larger collection, planning the layout before installing the first mount will usually produce a much better result.
You can browse BrickNest wall mounts by theme below.
Shop LEGO Wall Mounts
- All LEGO Wall Mounts
- LEGO F1 Wall Mounts
- LEGO Technic Wall Mounts
- LEGO Star Wars Wall Mounts
- Vertical LEGO Wall Mounts
Frequently Asked Questions
Are LEGO wall mounts safe?
A correctly designed mount installed using appropriate fixings for the wall and load can provide a secure way to display a compatible LEGO model. Always follow the installation instructions and use appropriate wall fixings.
Can LEGO Technic cars be wall mounted?
Yes. Large Technic cars are particularly suited to wall mounting because vertical or angled displays can reduce the amount of shelf space they require.
Can I wall mount LEGO without modifying the model?
Set-specific wall mounts can be designed to use existing support points on the LEGO build, so permanent modification of the model is generally unnecessary.
Is vertical or angled mounting better for LEGO cars?
Vertical mounting uses less horizontal space, while angled mounting tends to create a more dynamic appearance. The best option depends on your wall space and preferred display style.
Can LEGO Star Wars ships be wall mounted?
Many LEGO Star Wars ships work very well on wall mounts because they can be displayed in a flying orientation while freeing up shelf space.
Do I need different wall plugs for plasterboard?
Potentially. Fixing requirements vary by wall construction and load. Use fixings suitable for your specific wall and seek professional advice if you are uncertain.
Turn Your LEGO Collection Into a Wall Display
Whether you're displaying a single Technic car or planning an entire wall of F1 cars, Star Wars ships or aircraft, choosing a mount designed for the specific model makes the process much simpler.
Browse the complete BrickNest range of LEGO wall mounts.